Assembly
This guide will help you to assemble your PandaGarage board and power it up.
Case
You can either use the official PandaGarage case from MakerWorld or design your own based on the original model.
All found here.
The mounting holes on the PCB are made for M3 screws, in case you want to mount the PCB somewhere.
Power Supply
Your PandaGarge will be powered by the garage door motor. So you don't need any external power supply. When connected to a PC, the power supply by a USB-C port will be enough.
- USB-C for PC connection
- RJ12 Connector for garage door connection
danger
Only use one power supply option at a time. Otherwise, you may damage your board.
Also, flashing is only possible using the USB-C power option. The RJ12 powering is only possible when connected to the garage door motor.
Power Specifications
| Power Source | Current (A) | Voltage (V) |
|---|---|---|
| RJ12 | 1 | 24 |
| USB | 1 | 5 |