Installation

This guide will help you set up your PandaGarage board. When you buy the board, it comes pre flashed with the latest firmware.

There are two methods to set up your device:

1. Using the web installer
2. Building and flashing the firmware locally

tip

The driver installation is optional, because the host os should install the driver automatically.

Web Installer

1. Connect your PandaGarage to your PC using a USB-C cable.
2. Open the Web Installer.
3. Follow the on-screen instructions.

Local Build and Flashing

When you want to flash the firmware locally, you can either use the USB-C connection or use the UART Header with an external flasher. To build and flash the firmware locally, follow these steps:

1. Download or clone the repository.
2. Open the project using PlatformIO and VS Code.
3. Connect your PandaGarage to your PC using a USB-C cable, or an external flasher.
4. Build and upload the filesystem image.
5. Build and upload the firmware.